DFOX
DFOX allows you to read and write engine control units, automatic gearboxes, and more.
It also allows the complete cloning of the control units.
DFB Technology solutions provide a wide range of protocols:
- OBD driver for communication via the car diagnostic socket.
- BENCH MODE driver for communication via the external pinout of the control unit.
- BOOT MODE / BAM driver for low level communication.
- JTAG MODE driver for low level communication.
All this for ECU (Engine Control Unit) and TCU (Transmission Control Unit).
All this in one device.
Professional technical assistance, operating manual for each control unit:
- reading the original file
- write the modified file
- automatic calculation of Checksum / RSA / CVN in writing
- restoration of the original configuration and back to stock functions
DFOX for any type of vehicle
Modern vehicles have an increasing presence of electronic components.Thanks to DFOX you can work to read the contents of the processor, the flash and the Eeprom of the ECU, repair, clone or improve performance always in compliance with current regulations. With DFOX you can intervene on the control units of the various models of cars, motorcycles, tractors, trucks, marine vehicles, and industrial engines.
You will be able to consult the complete list of available vehicles and related information to carry out correct programming.
Supported vehicles
DFOX AUTO
DFOX MOTO
DFOX TRUCK
DFOX TRACTOR
DFOX MARINE
Areas of use of DFOX
The fields of use of DFOX are many!
OBD
Do you need an OBD ECU reading and remapping tool? DFOX is the perfect technology for you!
DFOX allows serial communication with the engine and automatic gearbox control unit via the OBD diagnostic socket.
Learn more
BENCH MODE
Are you looking for a tool for reading and remapping ECUs in BENCH mode? DFOX is the professional tool that’s right for you!
Learn more
BOOT MODE
Are you looking for a tool for reading and remapping ECUs in BOOT mode? Discover all the advantages of DFOX!
DFOX is the tool for reading and remapping engine ECUs in BOOT MODE. This advanced system allows communication with the low-level processor.
Learn more
JTAG MODE
Do you need a tool for reading and remapping ECUs in JTAG mode? DFOX is the perfect professional tool for you!
DFOX is a unique professional solution for mechatronics, which allows you to read and remap engine ECUs via JTAG MODE systems, supporting communication with the low-level processor.
Learn more
DFOX technical features
The connection modes supported by DFOX are listed below!
FULL READING AND WRITING VIA PINOUT IN BENCH MODE:
- BOSCH EDC7
- BOSCH EDC16
- BOSCH ME9 / MED9
- BOSCH MD1
- BOSCH MG1
- AURIX TC29x
- FREESCALE SPC5777
- ST SPC58
- BOSCH EDC17
- BOSCH MED17 / ME17
- SIEMENS PCR2.1 (Possibility of unlocking also via pinout)
FULL SYSTEM MODE VIA PINOUT (MICRO / FLASH + EEPROM) OF CONTROL UNITS:
- BOSCH
- CONTINENTAL
- DELCO
- DENSO
- MARELLI
- SIEMENS
- TEMIC
BOOT MODE:
- BOOT MODE C167 29Fxxx
- BOOT MODE ST K-LINE / RX-TX / CA
- ST10F168
- ST10F269
- ST10F273
- ST10F275
- ST10F276
- ST10F280
- ST10F296
- BOOT MODE Tricore for micro
- TC1724
- TC1728
- TC1738
- TC1762
- TC1766
- TC1767
- TC1782
- TC1791
- TC1792
- TC1793
- TC1796
- TC1797
- BOOT MODE Renesas
- SH7054
- SH7055
- SH7058
- SH7059
- SH7251
- SH72543
- SH72544
- BOOT MODE Mitsubishi
- MH7202
- MH7203
- MH8102F
- MH8105F
- MH8106F
- MH8202
- MH8206F
- MH8301F
- MH8304F
- MH8405F
- BOOT BAM SYSTEM MOTOROLA
- SPC5674
- SPC5777
- BOOT MODE Fujitsu
- BOOT MODE Hitachi
BDM AND JTAG MODE FOR:
- BDM MPC 55x
- BDM MPC 56x
- BDM MC32 / ZC32
- BDM HC12 / S12x
- JTAG NEXUS MPC/SPC 56xx
- JTAG NEXUS MPC 55xx
- JTAG RENESAS
- JTAG AUD SH7055
- JTAG AUD SH7058
- JTAG AUD SH7059
- JTAG AUD R5F7251
- JTAG AUD R5F72543
- JTAG AUD R5F72544
- JTAG R5F72513
- JTAG R5F72531
- JTAG R5F72543
- JTAG R5F72544
- JTAG R5F72546
- JTAG NEC 76F00xx
- 76F0038AGD
- 76F0038GD
- 76F0039AGD
- 76F0039GD
- 76F0040GD
- 76F0070
- 76F0085
ADDITIONAL PACKAGE FOR AUTOMATIC TRANSMISSIONS:
- COMPLETE READING AND WRITING TCU (MICRO + EEPROM)
- TCU ECU CLONING
- TCU CODING FUNCTIONS
Advantages DFOX
There are many solutions provided by DFB TECHNOLOGY.
DFOX allows you to read and write engine ECUs, automatic transmissions, and more.
It also allows the complete cloning of the control units.
DFB Technology solutions provide a wide range of protocols:
- OBD driver for communication via the car diagnostic socket.
- BENCH MODE driver for communication via the external pinout of the control unit.
- BOOT MODE / BAM driver for low level communication.
- JTAG MODE driver for low level communication.
All this for ECU (Engine Control Unit) and TCU (Transmission Control Unit).
All this in one device.
Professional technical assistance, operating manuals for each control unit.
Possibility of connection
Examples of connection with control units
BOSCH / DELCO / DELPHI / DENSO / MARELLI / SIEMENS / CONTINENTAL / TEMIC
Contact us for more information
About our services!
© 2022 | All rights reserved | DFB TECHNOLOGY S.R.L. Via Monte Grappa, 12, 35030 Selvazzano Dentro (PD) | P.IVA e C.F. 05240760289 | Sviluppato da DFB Technology